Rotogravure Inks

Europet (ET) Serie

ET SERIE (EUROPET). PU/NC and PU solvent based ink seriesis especially designed for the works needed high lamination performance.

This serie includes the codes used for retord applications.

TECHNICAL PROPERTIES

  • According to the substrate heat resistance is between 200C-220C (4bar ,1 sn)
  • Good ink transfer
  • Does not contain TAA or Phtalate
  • Lamination inks are suitable for solvent or solventless lamination applications
  • High lamination resistance

 

PRINTING REQUIREMENTS

Solvent Mixture for balancing vizcosity

  • Flexo : Ethyl Alcohol/Ethyl Acetate   9:1

Drying Time Adjustments

  • Accelerator : Ethyl Acetate 
    Retarder     : Ethoxy Propanol or Methoxy Propanol

Solvent Mixture for balancing vizcosity

  • Rotogravure  :

         For low speed machines : Ethyl Alcohol/Ethyl Acetate   1:1

         For high speed machines : Ethyl Acetate


PRINTING CONSIDERATIONS

  • The surface tension of the material to be used must be tested before printing. If necessary, the corona of the film should be improved.
  • After printing, the bobbins should be kept at room temperature for 24 hours for curing to occur.
  •  If the machine speed and drying conditions are well adjusted, solvent residue in the printing is minimized.

SHELF LIFE

  • The shelf life of ET series is 1 year in unopened packaging
  • Shelf life of golds, imitation golds, silvers are 6 months in unopened packaging
  • Shelf life of inks containing fanal pigments are 1 month.

 

Europet (ET) Serie
Click the link below to download the PDF file.
warning ikon
Perform safety test.
error ikon
Safety test failed.
warning ikon
You can send 5 messages in one hour! Your hourly message sending limit is over.
success ikon
Your message is successfully sent. Our authorized officers shall contact you as soon as possible.
error ikon
A failure occured
success ikon
Your record has been successfully sent.