Flexo Inks

Eurofleks-Mat (EFM) Serie

NC-solvent based ink series designed especially for flexo surface printing for mat applications.

Substrates : HDPE, LDPE, paper, cardboard, etc.


  • According to the substrate heat resistance is between 140C-160C (3bar, 1sn) 
  • Good ink transfer
  • Does not contain TAA or Phtalate
  • To increase scratch resistance in surface printing inks KA-0017 Scratch Resistance Additive should be added by 10-15%
  • Not suitable for lamination
  • Production Viscosity: 30-35 sn/D4/25 C



Printing Viscosity

  • Flexo with Dr. Blade :  22-25 sn./D4/25C               
    Flexo without Dr. Blade: 18-22 sn./D4/25 C

Printing Viscosity Preparations

  • For flexo : 80% Ethy Alcohol-20% Ethyl Acetate mixture (4-1)

Drying Time Adjustments

  • Accelerator : Ethyl Acetate                         
    Retarder     : Ethoxy Propanol or Methoxy Propanol



  • Shelf life of EFM series is 1 yearsin unopened packaging.
  • Shelf life of golds, imitation golds, silvers are 6 month in unopened packaging.
  • Shelf life of inks containing fanal pigments are 1 month.
Eurofleks-Mat (EFM) Serie
Click the link below to download the PDF file.
warning ikon
Perform safety test.
error ikon
Safety test failed.
warning ikon
You can send 5 messages in one hour! Your hourly message sending limit is over.
success ikon
Your message is successfully sent. Our authorized officers shall contact you as soon as possible.
error ikon
A failure occured
success ikon
Your record has been successfully sent.